Products

Disposable microfibre filter elements for particulate and coalescing applications. A range of size and grades to cover all applications. Industry standard sizes allows use in other propriety filter housings. Microfibre filter elements can remove up to...

Stainless steel filter elements from 5-layer sintered mesh and single layer types. The 5-layer types are sintered together to form an integrated porous element. The middle mesh is of very fine gauge and determines the filtration rate, with five inner...

PTFE and PE sintered filter elements for particulate applications. Special sizes and grades can be produced to suit your applications. PTFE (Teflon) filter elements, when used with our FF series filter housings, offer a 100% PTFE solution.

Disposable in-line filters are a self-contained filter solution. A disposable filter element is encapsulated into a plastic body with integral inlet and outlet spigots. DIFs offer a low cost filter solution that is fast and easy to replace. Stainless...

316L stainless steel housings for particulate and coalescing duties in a huge ranges of sizes and pressure ratings. Port sizes from 1/8" up to 2" and from vacuum to over 1300 bar working pressures. All our stainless steel housings have CE marks if required...

Disposable In-Line Adsorbers (DIA) consist of plastic bodies filled with granular adsorption material and fitted with integral inlet and outlet filter pads. The adsorber cartridges have a similar arrangement to the DIA but are designed to be fitting into...

PTFE-membrane housings with both hydrophobic and oleophobic membrane types for high-performance separation liquid from gases. Combination housings with both a PTFE-membrane and coalescing filter element. Liquid/liquid separation is also possible using...

Classic Filters’ high-efficiency aluminium filter housings are purpose built for compressed air applications. With a wide selection of port sizes and pressure ratings available, we will provide a high efficiency filtration solution to suit your application r...

Available in PTFE, PP, PVDF and Nylon and several different sizes and configurations. We can offer custom housing for OEM applications using our NT, NL and NNS series housings as a basis. Low cost and effective filtration.

Our brass filter housings have bodies machined from solid brass bar, with nylon internals and Viton seal. These brass filter housings are ideal for point-of-use instrument air filtration. Industry Standard Sizes The housing accept an industry standard...

Stainless steel housings with flanges machined into the head. Al components are machined from solid 316L bar and no welding is needed - CE marked as required by PED 2014/68/EU. All flange types can be supplied including ASME/ANSI B16.5, BS 4504, SAE ...

Drain vessels increase the drainage capacity of coalescing filter housings. Drain vessels can either be attached directly to the drain port of a housing in effect extending the bowl of the housing to allow far more liquid to be held, or they can be attached...

Automatic drains are used to remove liquids automatically from a coalescing filter housing - they connect directly to the drain port of the filter housing. Our DN103 and DF105 stainless steel automatic drain housings are used in positive pressure applications...

Regulator and filter regulators in 316L stainless steel with either a plastic or stainless steel bonnet. These housings are Ideal for instrument air applications. The filter regulators can be fitted with a stainless steel filter element of a disposable...

Cyclone filter housings are one of the most innovative, low maintenance solutions for liquid filtration available. The cyclone effect is used to flush the face of the filter disc so the solid particles are removed to the bypass port and only the low flow...

Fast loop filter housings minimise the time delay associated with sample systems for on-line analysers. A relatively high flow is used to get the sample close to the analyser, before the low flow sample is split using the filter housing and the rest of...

Housing or SP76 modular substrate sampling systems. Classic Filters offers 316L stainless steel filter housings for particulate and coalescing duties and PTFE-membrane housings that conform to SP76 standards. All our housings are designed to have a minimal...

Processes and systems that require the separation of liquid aerosols and droplets from gas need a coalescing filter. This type of filter element essentially comprises of two parts, an inner and an outer layer. The inner layer consists of a high-efficiency...

Need an unconventional bespoke or custom filter housing or filter element? No problem. Classic Filters’ Design and Engineering teams will work with you to build a custom-made solution precisely tailored to your requirements. Just send us a drawing o...

Need a filter housing in an exotic material? No matter how exotic your material requirements Classic Filters can produce housings made from them. 316L stainless steel is just the start: we can produce filter housings in Titanium, Hastelloy, Monel, Inconel,...