Russian GOST R Certificate for Classic Filters

ByDavid Janes

 

GOST R Certificate Logo

Most products exported to Russia require a GOST R Certificate in order to pass through customs and to be sold and marketed within the Russian Federation.

The Russian Government introduced legislation during 1993, requiring products to meet minimum safety standards. The Federal Agency on Technical Regulating and Metrology (Rostekhregulirovanie, GOST) is responsible for standardization and certification.

GOST R Certificate for Russia

The mandatory GOST R certificate was issued following technical evaluation of Classic Filters’ products to ensure compliance to Russian safety standards.

Classic Filters GOST R Certificate can be viewed and saved by clicking here.

Need more information or assistance with your filtration problem in Russia? You can leave a comment below or contact us by calling +44 (0)1634 724224, use the form on the right or send us an email to [email protected]

 

Similar Posts

Using a disposable in-line filter to save space

Using a Disposable In-Line Filter to Save Space

ByDavid Janes Blog

How can you use a disposable in-line filter to save space? One of our OEM customers uses NN112.201 filter housings for particulate removal in their portable flue gas analysers. These housings offer a low cost, high efficiency solution for stack gas applications and are widely specified. However, for a new gas analyser they found that…

Sample System Filters Offer Flexibility

ByDavid Janes Blog

 In this post we look at the importance of flexibility required when selecting the correct sample system filter. Process analysers continuously measure part of a process stream very accurately. The sample conditioning system is one of the most important issues for process analysis. Many analyser sample systems use a “fast loop” bypass flow to rapidly…

SML304.221 PTFE-Membrane Housing

Removing Water from a Diesel Sample with a PTFE Membrane

ByDavid Janes Blog

One of our OEM customers successfully uses the SML206.221.M8 PTFE Membrane Housing to remove water from a diesel sample system prior to an on-line analyser. Recently a new application required a larger flow rate at lower pressure so we designed a new sized housing for them. The SML304 series uses a larger 89mm diameter PTFE…

ECHO Logo - Distributor of Solvenia

New Distributor for Slovenia

ByDavid Janes Blog

We are happy to announce that ECHO d.o.o. have been appointed as our distributor for Slovenia. Located in Slovenske Konjice, they are ready to provide local support for users of Classic Filters products. As with all our distributors, ECHO combine great experience with excellent customer service. This is something we pride ourselves in providing to…

Custom SS217 CNG Filter Housing

Need a 2nd Outlet Port on CNG Filter Housings? No problem

ByDavid Janes Blog

A customer requested a special CNG filter housings with two outlet ports. This presented no problem for us as we can make housings with any configuration you can imagine. It’s our flexibility that customers love – if you need something special incorporated into the filter housing design we are happy to help. High Pressure Coalescing Filters With…

Leave a Reply

Your email address will not be published. Required fields are marked *